|
| |
ARMY TM 9-4120-381-14
NAVY EE-000- CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
4-48.
INDICATOR LIGHTS (DSII-DS7, DS9).
This task consists of: Inspection
Removal
Installation
INITIAL SETUP:
Tools
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Crimping tool (pigtail) (Item 10, Appendix B)
Personnel :1
Equipment Conditions:
WARNING
Disconnect input power to the air conditioner before performing any internal maintenance. Voltages
used can KILL. Shutting the unit off at the control panel does not disconnect unit power.
1.
Disconnect air conditioner input power at source.
2.
Open left electric plate (para 4-30).
3.
Open right electric plate (para 4-31).
INSPECTION
1.
Check that light lenses are not cracked or broken. Replace light, if damaged (see Figure 4-51).
2.
Check that leads are properly connected (see Figure FO-3). Repair all broken leads. If wiring harness is
damaged, repair as necessary.
REMOVAL
1.
Tag and disconnect leads.
2.
Remove clip (1).
3.
Remove light assembly (2) through front of panel.
INSTALLATION
1.
Install light assembly (2) through front of panel.
2.
Install clip (1).
3.
Reconnect leads and remove tags.
FOLLOW ON PROCEDURE
1.
Close left electric plate (para 4-30).
2.
Close right electric plate (para 4-31).
3.
Install right front evaporator panel (para 4-25).
4.
Connect air conditioner unit power at source.
4-89
|
