|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
5-40.
VIBRATION ELIMINATORS.
This task covers:
Inspection
Removal
Installation
INITIAL SETUP:
Tools
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Personnel: 1
Equipment Conditions:
WARNING
Disconnect input power to the air conditioner before performing any internal maintenance. Voltages
used can KILL. Shutting the unit off at the control panel does not disconnect unit power.
1.
Disconnect air conditioner input power at source.
2.
Remove right front condenser panel (para 4-28).
INSPECTION
1.
Inspect for evidence of leaks or damaged lines (see Figure 5-29).
2.
If a leak is suspected or indicated, test per paragraph 5-15.
REMOVAL
1.
Pump down refrigerant system (para 5-21).
2.
Remove screw (2), locknut (6), two flat washers (3) and (5), and clamp (4).
3.
Debraze tubing (7) at joints (para 5-14).
4.
Remove vibration eliminator (1).
INSTALLATION
1.
Position vibration eliminator (1) in frame.
2.
Braze tubing (7) at joints (para 5-14).
3.
Install clamp (4) with screw (2), two flat washers (3) and (5), and locknut (6).
4.
Leak test all newly connected joints and those in the repair area (para 5-15).
FOLLOW ON PROCEDURE
Perform start up after repairs (para 5-22).
5-88
|
