| |
ARMY TM 9-4120-381-14
NAVY EE-00-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
5-48. PUMP END BEARING ASSEMBLY - Continued.
Figure 5-38. Pump End Bearing Head Assembly
REASSEMBLY
1.
Install oil pump gasket (8).
2.
Place oil pump bearing head assembly (9) in mounting position.
3.
Install eight cap screws (10) and torque to 30-35 ft-lbs.
4.
Install pump rotor (11).
5.
Install pump rotor retaining ring (7).
6.
Install drive segment (6).
7.
Install two cap screws (5) and torque to 4-6 ft-lbs.
8.
Install oil feed guide vane and spring (4).
9.
Place gasket (3) and cover plate (2) in mounting position.
10.
Install four cap screws (1) and torque to 16-20 ft-lbs.
FOLLOW ON PROCEDURE
Install compressor (para 5-46).
5-112
|