|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
5-51. TERMINAL PLATE.
This task covers:
Inspection
Removal
Test
Installation
INITIAL SETUP:
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Wrench, torque, 1/2", 10-150 ft-lbs (Item 20, Appendix B)
Goggles, industrial (Appendix C)
Materials:
Rags (Item 12, Appendix E)
Lubricating oil (Item 9, Appendix E)
Solder, lead-tin alloy (Item 18, Appendix E)
Flux, solder, liquid rosin base (Item 19, Appendix E)
Personnel: 1
Equipment Conditions:
WARNING
Disconnect input power to the air conditioner before performing any internal maintenance. Voltages
used can KILL. Shutting the unit off at the control panel does not disconnect unit power.
1. Disconnect air conditioner input power at source.
2. Remove compressor from air conditioner (para 5-46).
3. Remove electrical box cover (para 5-50).
INSPECTION
Check terminal plate for corrosion, burned thermal barrier, and loose or missing mounting hardware. Replace plate if
defective.
REMOVAL
1.
Tag and disconnect external leads (3) from terminal plate (2).
2.
Remove four capscrews (4).
3.
Pull terminal plate (2) out from crankcase (6).
NOTE
When disconnecting internal wire leads, cut leads as close as possible to terminal plate.
4.
Tag and disconnect internal leads (5) from terminal plate (2).
5.
Remove terminal plate (2).
TEST
Using multimeter, measure each feed through terminal of terminal plate for continuity. If any feed through terminal does
not have continuity, replace terminal plate.
5-120
|
