|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
6-9 FRESH-AIR DAMPER OPERATOR BRACKET.
This task covers:
Inspection
Removal
Repair/Replace
Installation
INITIAL SETUP:
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Electric portable drill (Item 6, Appendix B)
Twist drill set (Item 7, Appendix B)
Riveter (Rivnut) (Item 9, Appendix B)
Personnel: 1
Equipment Conditions:
Open rear evaporator panel (para 6-6).
INSPECTION
1.
Check that bracket (5) is not bent, cracked, or punctured. Replace bracket, if defective (see Figure 6-4).
2.
Check for damaged, loose, or missing mounting hardware.
NOTE
For removal of the thermostat box the air conditioner must be removed from the van or shelter.
REMOVAL
1.
Remove fresh air damper solenoid (para 4-66).
2.
Remove three screws (1), locknuts (4), and six flat washers (2) and (3).
3.
Remove bracket (5).
REPAIR/REPLACE
Repair consists of replacing rivnuts (6) or bracket (5).
INSTALLATION
1.
Place bracket (5) in mounting position.
2.
Install three screws (1), six flat washers (2) and (3),, and three locknuts (4).
3.
Install fresh air damper solenoid (para 4-66).
FOLLOW ON PROCEDURE
Close rear evaporator panel (para 6-6).
6-9
|
