|
| |
ARMY TM 9-4210-381-14
NAVY EE-000-CA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-31
6-13
CONDENSER AIR IN RFI FILTER
This task covers:
Removal
Replace
Installation
INITIAL SETUP:
Tools:
Tool kit, service, refrigeration unit (Item 1, Appendix B)
Personnel: 1
Materials:
Adhesive (Item 1, Appendix E)
Bulk gasket material
Rags (Item 12, Appendix E)
Equipment Conditions:
NOTE
If the condenser RFI filter screws are not accessible from outside the shelter or van, the air
conditioner may have to be removed from the van or shelter. .Remove rear condenser panel (para 6-
10).
REMOVAL
1.
Remove ten screws (1), flat washers (3), and lockwashers (2) (see Figure 6-8).
2.
Remove filter (4).
REPLACE
Replace consists of replacing condenser air in RFI filter (4).
INSTALLAI ION
1.
Coat surfaces of metal and gasket (5) with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers.
2.
Starting with an end, carefully attach gasket to metal surface. Press into firm contact all over.
3.
Place filter (4) in mounting position.
4.
Install ten screws (1), lockwashers (2), and flat washers (3).
FOLLOW ON PROCEDURE
Install rear condenser panel (para 6-10).
6-17
|
