Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: REPAIR/REPLACE-Continued.
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

ARMY TM 9-4120-381-14 NAVY EE-000- CA-MMA-010/7053-AC AIR FORCE TO 35E9-136-31 4-27.  LEFT FRONT CONDENSER PANEL-Continued. REPAIR/REPLACE-Continued. 1. Gasket-Continued. WARNING Acetone   and   Methyl-Ethyl   Ketone   (MEK)   are   flammable   and   their   vapors   can   be   explosive. Repeated or prolonged skin contact or inhalation of vapors can be toxic.  Use a well ventilated area, wear gloves, and keep away from sparks or flame. a. Clean area for new gasket, using acetone or MEK and a stiff brush. b.    Coat surfaces of metal and gasket with adhesive.  Let both surfaces dry until adhesive is tacky but will not stick to fingers. c. Starting with an end, carefully attach gasket to metal surface.  Press into firm contact all over. d. Install captive fasteners. 2. Insulation. a. Cut and remove damaged section of insulation (5). b. Clean area for new insulation, using acetone or MEK and a stiff brush. c. Cut replacement insulation to fit. d. Coat surfaces of metal and insulation with adhesive.  Let both surfaces dry until adhesive is tacky but will not stick to fingers. e. Starting with an end, carefully attach insulation to metal surface.  Press into firm contact all over. f. If insulation retainers were removed, install new retainers (4) with rivet (6). 3. Capture Fasteners. a. Remove split ring retainer (7), fastener (10), thermoplastic wear washer (8), and ejector spring (9). b. Install ejector spring (9), thermoplastic wear washer (8), fastener (10), and split ring retainer (7). INSTALLATION 1. Position panel (2) in place. 2. Tighten six captive fasteners (1). FOLLOW ON PROCEDURE Connect air conditioner input power at source. 4-48

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business