|
| |
TM 9-4120-389-14
4-15. ACCESS (CHARGING VALVE) COVER I
a.
Removal
(1)
Remove 8 screws from access cover and casing.
(2)
Remove access cover.
Figure 4-13. Access Charging Valve Cover Removal/Replacement
b.
Inspection
(1)
Check that access cover is not bent, cracked or punctured. Replace severely damaged access
cover.
(2)
Check that gaskets are not torn loose or missing. Repair as needed. Refer to para. 4-13.
(3)
Check that information plates are not torn or missing. Check for readability. Replace as needed.
Refer to para. 4-13.
c. Installation
(1)
Align eight mounting holes in access cover with casing fasteners.
(2)
Secure access cover to casing with eight screws.
4-66
|
