|
| |
TM 9-4120-389-14
4-22. VENTILATION GUARD
a.
Inspection
(1)
Check to see that ventilation guard is not bent, cracked or otherwise
damaged.
(2)
Replace severely damaged ventilation guard.
Figure 4-20. Ventilation Guard Removal/Replacement
b.
Removal
(1)
Remove four screws, lockwashers and flat washers from ventilation guard
and casing.
(2)
Remove ventilation guard.
c.
Installation
(1)
Align four holes in ventilation guard with casing fasteners.
(2)
Secure ventilation guard to casing with four screws, lockwashers and flat
washers.
4-76
|
