|
| |
TM 9-4120-389-14
4-24. RING AND CLIP
Preliminary procedures:
1. Remove evaporator inlet louver for front (See para.
4-18).
2. Remove condenser fan motor for lower rear leftside
(See para. 4-25).
3. Remove condenser motor support for lower rear
leftside (See para. 4-29).
4. Remove condenser scroll for lower rear leftside (See
para. 4-28).
a.
Inspection
(1)
Check for damaged ring and clip.
(2)
Check for loose or missing hardware. Secure and replace as needed.
b.
Removal
(1)
Remove two screws, lockwashers and nuts from ring and clip and casing.
(2)
Remove ring and clip.
c.
Installation
(1)
Position ring and clip with thru holes in casing.
(2)
Secure ring and clip to casing with two screws, lockwashers and nuts.
Follow-on procedures:
1. Install evaporator inlet louver for front (See
para. 4-18).
2. Install condenser scroll for lower rear left side (See
para. 4-28).
3. Install condenser motor support for lower rear left side
(See para. 4-29).
4. Install condenser for motor for lower rear left side (See
para. 4-25).
4-79
|
