|
| |
TM 9-4120-389-14
(4)
Remove the bracket.
(5)
Check the grommets for damage. Replace damaged grommet.
d.
Installation
(1)
Verify that all four grommets are properly seated in chassis.
(2)
Insert four brushings in four grommets.
(3)
Align through holes in the bracket with bushings.
(4)
Secure the bracket to the chassis with four bolts, eight flat washers and four
locknuts.
(5) Secure motor B 3 to the bracket with four bolts and flat washers.
Follow-on procedure: Install evaporator scrolls (LH and RH) (See para. 4-33).
4-108
|
