|
| |
TM 9-4120-389-14
e.
Installation
(1)
Align connector to mounting frame with "P2A" and "P2B" markings on top.
(2)
Secure connector to frame with eight screws, and self-locking nuts.
(3)
Align connector and switch shafts with two grommeted holes in mounting plate.
(4)
Secure mounting frame with four screws.
(5)
Reconnect wire leads and remove tags.
(6)
Secure housing to control module with four screws.
Follow-on procedure: Install control module (See para. 4-44).
4-135
|
