|
| |
TM 9-4120-389-14
(1) Check individual wires for loose solder connections, loose terminal connections and cut or
broken wires. Replace as needed.
(2) Check clamps for loose or missing hardware. Tighten and replace as needed.
b. Removal
(1) Tag and disconnect all wire leads.
(2) Cut ties as needed.
(3) Remove clamps as needed.
c. Test
(1) See wiring diagrams (FO-1) and continuity test individual wires with no continuity.
(2) Repair or replace wires with no continuity.
d. Repair
(1) See para. 4-36 for general wire repair instructions.
(2) See Table 4-3 (wire list) for length and terminal lug connection information.
e. Installation
(1) See tags and wiring diagram (FO-1) and connect all wire leads. Remove tags.
(2) Install ties as needed.
(3) Install clamps as needed.
Follow-on procedure: Install top cover (See para. 4-14).
4-163
|
