|
| |
TM 9-4120-389-14
(4) Remove nameplate.
(5) Cut ties sufficient to remove leads.
(6) Remove solenoid coil from valve.
c. Coil installation
(1) Install coil and nameplate on valve.
(2) Secure coil to valve with nut.
(3) Install ties as needed.
(4) Install two clamps over wire leads.
(5) Secure clamp to condenser motor support with screw, flatwasher, lockwasher and nut.
(6) Secure clamp to condenser scroll with screw and lockwasher.
(7) See tags and connect leads L1-1 and L1-2 to TB4. Remove tags.
Figure 5-11. Solenoid Valve Coil Replacement
Follow-on procedure: Install top cover (See para. 4-14).
5-35
|
