|
| |
TM 9-4120-389-14
5-28. CONDENSER GUARD
a. Inspection
(1)
Check to see that condenser guard is not bent, cracked or otherwise damaged.
(2)
Replace condenser guard if severely damaged.
b. Removal
Figure 5-26. Condenser Guard Removal/Replacement
(1)
Remove condenser coil (See para. 5-26).
(2)
At top, tilt condenser guard forward and out of unit.
c. Installation
(1)
Place bottom surface of condenser guard in lower corner of casing.
(2)
Tilt condenser guard back to lie flush with casing.
(3)
Slide condenser guard up to align with through holes in casing.
(4)
Install condenser coil (See para. 5-26).
5-81
|
