|
| |
TM 9-4120-389-14
SECTION II. SERVICE UPON RECEIPT
4-2. UNLOADING.
The Model 3864 Air Conditioner is packaged in a container designed for shipment and handling with the cabinet
in an upright position. The base of the container is constructed as a shipping pallet with provisions for the
insertion of the tongs of a fork on materials handling equipment.
a. Remove all blocking and tie downs that may have been used to secure the container to the carrier.
WARNING
Do not allow unit to swing while suspended from a lifting device. Do not allow
anyone under equipment suspended from a lifting device. Failure to observe
warning may result in injury to personnel and damage to equipment.
CAUTION
Use care in handling to avoid damage to air conditioner. If an overhead lifting
device must be used, use appropriate sling so that weight of unit is borne by
base of the shipping container.
b. Use a forklift truck or other suitable material handling equipment to remove
the unit from the carrier.
14-3. UNPACKING
a. General. Normally, the packaged air conditioner should be moved into the
immediate area in which it is to be installed before it is unpacked.
NOTE
The shipping container is of such a design that it may be retained for reuse if
frequent relocation of the air conditioner is anticipated.
4-2
|
