 |
|||
|
|
|||
|
Page Title:
Location of Major Components - continued |
|
||
| ||||||||||
|
|
 TM9 4120-423-14&P
1
CONDENSER COVER. Shown in stowed (operational) position. When rolled down and
snapped (for shipment, non-operational travel and storage), it protects the grilles, meter, valves,
sight glass and high-pressure switch reset.
2
FRESH AIR COVER. Seals fresh air opening closed on either left or right side.
3
POWER CONNECTOR (J1). Connection point for input 208 volt, 3 phase, 400 Hz power cable.
4
REMOTE CONTROL CONNECTOR (J7). Connection point for remote control cable when
used in remote location.
5
TEMPERATURE CONTROL (A1-R1). Allows adjustment and control of the temperature when
operating in the cool or heat modes.
6
RUN INDICATOR LIGHT. Lights when the unit is operating. Also lights when pressed in (for
test purposes) if power is connected.
7
MODE SELECTOR SWITCH (S1). Allows operator to select COOL, OFF, LOW HEAT or
HIGH HEAT operating mode.
8
TIME TOTALIZING (HOUR) METER (M1). Indicates operating time (elapsed) in all modes.
9
SIGHT GLASS. Allows visual inspection and indicates the condition of the liquid refrigerant
when the unit is operating in the COOL mode.
10
LOW SIDE SERVICE VALVE. Provides a connection point for maintenance, testing, and
service. Unauthorized personnel should not tamper with this valve.
11
HIGH SIDE SERVICE VALVE. Provides a connection point for maintenance, testing, and
service. Unauthorized personnel should not tamper with this valve.
12
HIGH PRESSURE CUTOUT (SWITCH) RESET (S4). Permits manual closing (reset) of switch
following system shutdown due to excessive refrigerant system pressure.
0002 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals