 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9 4120-423-14&P
8
Condenser Guard
a
Check that there is no damage.
b
Check that it is not blocked in any way.
9
Condenser Discharge Grille
a
Check that there is no damage.
b
Check that it is not blocked in any way.
10
Snap Fasteners
Snap cover closed and check snaps.
11
Condenser Cover
a
Untie and roll condenser cover down.
b
Check for tears, worn edges, and holes.
c
Check for accumulated dirt and mildew.
d
If the necessity of washing is indicated, use fresh water with a small amount of a mild
detergent. Dry thoroughly.
e
Unsnap, roll cover up and tie in place.
12
Condenser Intake EMI Screens
a
Observe for damages, such as punctures, cuts, or mashed areas.
b
Observe for air flow blockage.
13
Condenser Discharge EMI Screen
a
Observe for damages, such as punctures, cuts, or mashed areas.
b
Observe for air flow blockage.
14
Knobs, Remote Control
Check that remote control knobs are in place and not broken.
15
Remote Control Cable (Visible Portions)
a
Check that cable is in good condition.
b
Check that cable is placed so that it will not be damaged or create problems for operating
personnel.
c
Check that all connections are tight.
0012 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals