 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9 4120-423-14&P
WARNING
Disconnect input power to the air conditioner before performing any maintenance
to the electrical system. Voltages used can be lethal. Shutting the unit off at the
control module does not disconnect power to the various components of the air
conditioner.
1
Using screwdriver, remove eighteen screws from condenser guard.
2
Being careful not to damage the EMI gasket and screen, lift the guard and EMI screen from the
housing.
3
Using screwdriver, socket, and ratchet, remove the two snap fasteners and locknuts.
4
Using screwdriver, remove eight screws from condenser discharge grille.
5
Being careful not to damage the EMI gasket and screen, lift the grille and EMI screen from the
housing.
CLEANING
1
Wash screens in a mild detergent and water solution. If possible, use a large flat pan. Move
screens up and down so that water is forced through the honeycomb to dislodge dirt.
2
Rinse thoroughly in clear water.
3
Shake out excess water prior to installation.
REPAIR OR REPLACEMENT
1
To replace reference plates, use a drill bit slightly smaller than the diameter of the rivet being
removed.
2
Drill the rivets out and remove the old plate.
3
Align holes in replacement plate and cover and install new rivets.
4
Minor dents and bent edges can be straightened using common sheet metal repair procedures.
Panels that are badly dented, bent, or punctured should be replaced.
5
Should touch up or refinishing be necessary, see WP0016.
0046 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals