INSTALLATION - TM-9-4120-428-140110

TM 9-4120-428-14

0020 00

CLEANING

WARNING

Do not use near an open flame or excessive heat. Dry cleaning solvent that is used to

clean parts is potentially dangerous to personnel and property.

Cleaning - Continued

1. When necessary, wipe or brush dirt from the screens.

2. If screens are extremely dirty, clean with a detergent solution or dry cleaning solvent.

INSTALLATION

NOTE

The six screws (7) on the vertical frames of the condenser air inlet screen also secure the

condenser coil to the air conditioner housing.

1. Install the condenser air inlet screen (6) using six screws (7) and lock washers (8).

2. Install two screws (4) and lock washers (5).

WARNING

When the unit is to be operated in a Nuclear, Biological, or Chemical (NBC)

environment, the fresh-air opening must be sealed or connected to an appropriate NBC

filtering device.

3. Install the fresh air ventilation screen (3) using two screws (1) and lock washers (2).

4. Connect power at power source.

END OF WORK PACKAGE

0020 00-2