|
|
TM 9-4120-428-14
0040 00
REPLACEMENT
1. Tag and disconnect all wires from the relay.
2. Remove four screws (1), flat washers (2), and clips (3).
3. Pull the relay (4) from the Junction Box.
4. Mount the new relay using four screws (1), flat washers (2), and clips (3).
5. See Figure 4 -4, Wiring Diagram. Connect all leads.
NOTE
FOLLOW-ON MAINTENANCE:
Install Junction Box (WP 0036 00)
0040 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |