REPLACEMENT - TM-9-4120-428-140286

TM 9-4120-428-14

0093 00

REPLACEMENT

Gasket and Insulation Replacement

1. Use only the gaskets, insulation, or nameplates identified in TM9-4120-400-24P.

2. Remove as much old gasket or insulation material from the unit as possible by pulling or scraping it away from the

metal surface.

WARNING

Adhesive remover is flammable and the vapors can be explosive. Repeated or prolonged

skin contact or inhalation of vapors can be toxic. Use in a well-ventilated area, wear

gloves, and keep away from sparks or flame.

3. Soften and remove the old adhesive and material residue, using adhesive remover and a stiff brush.

4. Coat all mating surfaces of the metal and material with adhesive. Let both surfaces air-dry until adhesive is tacky,

but will not stick to fingers.

5. Starting at one end, carefully attach material to the metal. Press firmly into place.

NOTE

FOLLOW-ON MAINTENANCE:

Connect power at the power source

END OF WORK PACKAGE

0093 00-2