REFRIGERATION UNIT (RU)

TM 10-4110-262-13&P

0023 00

UNIT MAINTENANCE

ADVANCED DESIGN REFRIGERATOR, 300 CUBIC FOOT (ADR-300)

4110-01-465-4158 / 4110-01-465-4564

REFRIGERATION UNIT (RU)

REMOVE/INSTALL

INITIAL SETUP

References

Tools and special tools

None

Tool Kit, Organizational Maintenance

(WP 0051 00, Table 2, Item 4)

Equipment Conditions

ADR-300 set up and connected to a power

Materials and Parts

source (See WP 0005 00 for

Adhesive (WP 0068 00, Item 2)

set-up procedures).

Outer Seal (WP 0057 00, Item 4)

Personnel Required

(2), and forklift driver

GENERAL

This work package outlines procedures for removing the refrigeration unit (RU) from the ADR-300

insulated container (IC). It also presents the steps for installing a new RU in an IC.

WARNING

Personnel should wear head protection while working

below the forks of a forklift. RU mounting bolts should not

be removed until the RU is supported by a forklift. Always

use a safety strap to keep the RU on the forklift tines

during removal and installation. The RU is heavy and the

unit falling on personnel may cause serious injury or

death.

REMOVE

1. Shut down the RU, disconnect the IC power supply cord from the IC power entry connector and

secure the cord.

2. Disconnect the external condensate drain tube from the RU base plate.

0023 00-1