INSTALLATION - TM-5-4120-393-140149

TM 5-4120-393-14

4-40. Junction Box Number One (cont)

Using screwdriver, secure push-pull control (7) wire casing with spacer plate (5), clamp (4) and two screws (1) and

washers (2).

Check that circuit breaker is turned on when knob on rear of air conditioner is pulled out and pushed in. (Pushing knob

in should not turn circuit breaker off.)

10. Connect the following harness connectors: P13 to J13, P4 to J4, P10 to J10, P14 to J14, and P22 to J22.

NOTE

FOLLOW ON MAINTENANCE:

1. Install lower front panel. See para 4-24.

2. Connect power.

4-97