Compressor Installation. (Cont) - TB-9-2320-279-13-10403

TB 9-2320-279-13-1

Install compressor (6) on mounting bracket (7)

with screw (8) and locknut (9). Do not tighten

locknut (9).

CAUTION

A washer may need to be installed as a shim

between outside of mounting bracket flange and

inside of compressor flange. Failure to comply

may result in compressor flange breaking off if

there is space between mounting bracket flange

and compressor flange when locknut is tightened.

Install compressor (6) on mounting bracket (7)

with screw (10), washer (11), and locknut (12).

Do not tighten locknut (12).

Install two compressor straps (13) on

compressor (6) with two screws (14) and

locknuts (15). Do not tighten locknuts (15).

Install two compressor straps (13) on mounting

bracket (7) with two screws (16) and

locknuts (17). Do not tighten locknuts (17).

Install strap (18) on mounting

bracket (7) with screw (19) and

locknut (20). Do not tighten

locknut (20).

0052-11