 |
|||
|
|
|||
|
Page Title:
Compressor Installation. (Cont) |
|
||
| ||||||||||
|
|
 TB 9-2320-279-13-1
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To
avoid injury or death, keep away from open
fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with
soap and water.
8.
Apply Loctite 242 to threads of four
screws (21).
WARNING
Mounting bracket and compressor are heavy.
Do not install without the aid of an assistant.
Failure to comply may result in injury to
personnel and/or damage to equipment.
9.
Solider A supports mounting bracket (7)
while Soldier B installs pad (22) and
mounting bracket (7) on engine (5) with
four screws (21) and lockwashers (23).
10. Install two compressor drive
belts (24 and 25) on compressor (6)
and pulley (26).
CAUTION
Do not over-tighten drive belts. Failure to
comply may result in damage to
equipment.
11. Using a belt tension gage, tighten
two compressor belts (24 and 25) to
90-100 lbs. (400-445 N).
12. Tighten two locknuts (9 and 12)
on compressor (6) and mounting
bracket (7).
13. Tighten two locknuts (15) on
compressor (6) and two compressor
straps (13).
14. Tighten two locknuts (17) on two
compressor straps (13) and mounting
bracket (7).
0052-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals