Compressor Installation. (Cont) - TB-9-2320-279-13-10406

TB 9-2320-279-13-1

22. Install two alternator drive belts (39 and 40) on

pulley (28) and pulley (41).

CAUTION

Do not over-tighten alternator drive belts. Failure to

comply may result in damage to equipment.

23. Using a belt tension gage, tighten two alternator

drive belts (39 and 40) to 70-90 lbs. (310-400 N).

24. Tighten locknut (38).

25. Tighten locknut (34).

26. Tighten locknut (20).

27. Install two wires (42 and 43) on terminal (44) with

lockwasher (45) and nut (46).

28. Install wire (47) on terminal (48) with nut (49).

29. Install two wires (50 and 51) on terminal (52) with

lockwasher (53) and nut (54).

0052-14