REMOVAL - TB-9-2320-364-13-P-10280

DRAFT

TB 9-2320-364-13&P-1

AC CONDENSER MOUNTING BRACKET REPLACEMENT - Continued

REMOVAL

PLSAC001

NOTE

Wheel chocks and wooden blocks are placed on top of battery box cover to support

condenser while condenser mounting bracket is being replaced.

If wheel chocks are not available, use similar size material to support condenser. Support

needs to be approximately 5.75 by 15.5 by 15.5 in.

1. Position two wheel chocks (1) on top of battery box cover (2).

PLSAC002

NOTE

Wooden blocks used in Step 2 should be 2 by 4 by 16 in.

2. Position two wooden blocks (3) on top of two wheel chocks (1).

0027-2