REMOVAL - continued - TB-9-2320-364-13-P-10281

DRAFT

TB 9-2320-364-13&P-1

AC CONDENSER MOUNTING BRACKET REPLACEMENT - Continued

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC003

3. Loosen locknut (4).

WARNING

AC condenser assembly weighs 75 lbs. (34 kg). Do not lift AC condenser assembly

without the aid of an assistant. Failure to comply may result in injury to personnel

and/or damage to equipment.

NOTE

After being removed from condenser mounting bracket, condenser will be positioned on

top of two wooden blocks that were installed in Step 2.

4. With the aid of an assistant, remove four screws (5) and condenser (6) from condenser mounting

bracket (7).

5. Remove locknut (8), screw (9), and support bar (10) from condenser mounting bracket (7).

Discard locknut.

6. Remove two screws (11) and washers (12) from condenser mounting bracket (7) and panel (13).

0027-3