INSTALLATION - continued - TB-9-2320-364-13-P-10310

DRAFT

TB 9-2320-364-13&P-1

AC EVAPORATOR CORE AND EXPANSION VALVE REPLACEMENT - Continued

5. Install preformed packing (19) and fitting (18) on expansion valve (20). Torque fitting (18) to 11-13 ft-lbs.

(15-18 Nm).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC011

6. Install evaporator core (14) on evaporator core housing (2) with two washers (17), lockwashers (16), and

screws (15).

7. Install foam tape (13) on evaporator core (14) and evaporator core housing (2).

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

PLSAC010

8. Install evaporator core housing (2) on heater/evaporator (7) with four washers (12), lockwashers (11),

and screws (10).

0030-6