AC HEATER/EVAPORATOR BLOWER MOTOR ASSEMBLY REPLACEMENT

DRAFT

TB 9-2320-364-13&P-1

0034

AC HEATER/EVAPORATOR BLOWER MOTOR ASSEMBLY REPLACEMENT

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

THIS WORK PACKAGE (WP) COVERS:

Removal

Installation

Follow-On Maintenance

INITIAL SETUP:

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Maintenance Level

Materials/Parts

Field Level Maintenance

Tags, Identification (Item 10, Appendix E)

Tape, Insulation, Electrical (Item 11, Appendix E)

Equipment Condition

Lockwashers (7) (Item 4, Figure 5, Appendix G)

Batteries disconnected (TM 9-2320-364-20).

Personnel Required

Heater/defroster tubing (upper plenums) removed

(TM 9-2320-364-20).

One

Tools and Special Tools

References

Tool Kit, General Mechanic's (Item 9, Appendix F)

TM 9-2320-364-20

REMOVAL

PLSAC065

NOTE

Tag and mark wires prior to removal to ensure proper installation.

1. Remove screw (1), lockwasher (2), washer (3), and ground wire (4) from heater/evaporator (5). Discard

lockwasher.

2. Remove three screws (6), lockwashers (7), washers (8), and cover (9) from heater/evaporator (5).