REMOVAL - TB-9-2320-364-13-P-10392

DRAFT

TB 9-2320-364-13&P-1

AC OPTIC RIBBON LIGHT SOURCE WIRE HARNESS REPLACEMENT - Continued

REMOVAL

PLSAC117

NOTE

Tag and mark wires prior to removal to ensure proper installation.

1. Remove screw (1), lockwasher (2), washer (3), and ground wire (4) from heater/evaporator (5). Discard

lockwasher.

NOTE

Wire 1052 being cut in Step 2 is from cab wire harness.

2. Cut wire 1052 (6) below butt splice (7).

3. Remove lamp socket (8) from light source (9).

PLSAC118

4. Remove bulb (10) from lamp socket (8).

0043-2