Compressor Installation - continued - TB-9-2320-364-13-P-10486

TB 9-2320-364-13&P-1

CAUTION

Fuel supply line must be inboard and over the leg on the compressor mounting bracket that attaches

to the transmission. Fuel return line must be outboard of compressor mounting bracket. Failure to

comply may result in damage to equipment.

NOTE

Verify that the holes on the compressor mounting bracket line up with the two holes drilled in

Step (32) and with the two holes on the transmission. Some slight grinding may be needed to get

holes to line up properly.

33. With the aid of an assistant, install compressor mounting bracket (52) on cradle support (56) with two

screws (57), washers (58), lockwashers (59) and nuts (60).

34. Secure compressor mounting bracket (52) to transmission (32) with two screws (61) and lockwashers (62).

Tighten two screws (61) to 54-65 lb-ft (73-88 Nm).

0055-16