Compressor Installation - continued - TB-9-2320-364-13-P-10487

TB 9-2320-364-13&P-1

CAUTION

Screws holding compressor to compressor mounting bracket and to two compressor straps must

have screw heads facing each other as shown. Failure to comply may result in damage to equipment.

35. Install compressor (63) on compressor mounting bracket (52) with screw (64) and locknut (65). Do not

tighten locknut (65).

CAUTION

A washer may need to be installed as a shim between outside of compressor mounting bracket flange

and inside of compressor flange. Failure to comply may result in compressor flange breaking off if

there is space between compressor mounting bracket flange and compressor flange when locknut is

tightened.

36. Install compressor (63) on compressor mounting bracket (52) with screw (66), washer (67) and

locknut (68). Do not tighten locknut (68).

37. Install two compressor mounting straps (51) on compressor (63) with two screws (69) and locknuts (70).

Do not tighten locknuts (70).

0055-17