Compressor Installation - continued - TB-9-2320-364-13-P-10488

TB 9-2320-364-13&P-1

38. Install two compressor drive belts (71 and 72) on compressor (63) and pulley (48).

CAUTION

Do not over tighten two compressor drive belts. Failure to comply may result in damage to

equipment.

39. Using a belt tension gage and pry bar, tighten two compressor drive belts (71 and 72) to 90-100 lbs.

(400-445 N).

40. Tighten two locknuts (70).

41. Tighten two locknuts (54).

42. Tighten two locknuts (65 and 68).

43. Install bracket (73) on compressor

mounting bracket (52) with two screws (74)

and locknuts (75).

44. Secure fuel supply line (76) to bracket (73)

with cable tie (77).

0055-18