SERVICE UPON RECEIPT - TM-10-4110-262-13-P0081

TM 10-4110-262-13&P

0008 00

OPERATOR' S, UNIT, AND DIRECT SUPPORT MAINTENANCE

ADVANCED DESIGN REFRIGERATOR, 300 CUBIC FOOT (ADR-300)

4110-01-465-4158 / 4110-01-465-4564

SERVICE UPON RECEIPT

No specific de-processing is required for any of the ADR-300 components before they are used.

However, the tasks prescribed in this work package must be performed to insure proper functioning of

this equipment.

GENERAL

The ADR-300 is shipped by air, rail, sea, or truck and will arrive with the following components:

Insulated Container (IC)

Refrigeration Unit (RU)

Shelf system (the shelf system is normally installed in the IC but may be removed for some

missions)

Operators, Unit and Direct Support Maintenance Manual

The following tasks must be performed upon receipt of the ADR-300.

Unpacking

The ADR-300 does not include packed components and as such, no unpacking is required. Upon arrival,

look over the unit to identify the components listed above. Report any discrepancies in accordance with

DA PAM 738-750.

Inspection

Perform the inspections described in Work Packages 0011 00, 0012 00, and 0013 00. Report any

damage or discrepancies on SF 364, Report of Discrepancy.

Verification of Equipment Modifications

Check to see if the system components have been obviously modified in any way. Notify your supervisor

or unit maintenance personnel if modifications are noted.

Pre-Operation Services

Service any damaged equipment, as necessary, using maintenance procedures presented in this manual.

Before operation, perform the "BEFORE" PMCS checks listed in Work Package 0010 00.

END OF WORK PACKAGE

0008 00-1/(2 Blank)