INSTALL (Cont)

TM 10-4110-262-13&P

0026 00

Freezer Door Latch

Freezer Door

Keeper

Plunger

Freezer Door

Spacer

Mounting

Plate

Plunger

INSTALL

1. Remove all remnants of sealant and adhesive by scraping or sanding the door surfaces.

2. Support the exterior freezer door latch assembly such that the screw holes align with the four

mounting holes in the door.

3. Thread the two short screws into the two holes closest to the door edge. Leave screws loose.

4. Support the freezer door spacer on the inside surface of the door and align the screw holes in the

door with the threaded holes in the ring.

5. Insert the longer screws into the remaining two holes in the freezer door latch assembly. Thread the

screws into the threaded holes in the freezer door spacer.

6. Insert the plunger handle into the hole on the inside surface of the door and support the inside

(plunger) assembly in position on the inside door surface.

7. Align the three holes in the plunger mounting plate with the small threaded holes in the freezer door

spacer. Thread the three screws from the inside assembly into the holes in the freezer door spacer.

0026 00-4