|
|
TM 10-4110-262-13&P
0031 00
WARNING
Be careful oil is hot and may be under pressure. Wear appropriate
safety clothing. Failure to comply may result in serious injury or death to
personnel.
9. Gently remove the compressor oil drain plug until the remaining oil is full.
10. Reinstall the compressor oil drain plug.
NOTE
If all of the oil is removed or replaced, then evacuate the compressor
before opening the service valves.
11. Open compressor suction and discharge service valves, and the receiver tank outlet valve.
12. Place unit in operation and in check oil level.
13. To add compressor oil, perform a compressor pump down. Adjust crankcase pressure slightly
positive and remove the oil fill plug above the oil sight glass.
Major Loss of Refrigerant
In case of a major loss of refrigerant, it must be assumed that some system oil is lost also. The oil level
should be verified by the "Checking the Oil Level" method in this manual.
Oil contamination
Color changed to a varnish color
Presence of contaminants in the oil.
0031 00-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |