Evaporator Coil - TM-10-4110-262-13-P0195

TM 10-4110-262-13&P

0031 00

11. Remove the suction line cleanup filter.

12. Reinstall the suction pressure regulator.

13. Leak check, evacuate, and open all valves.

14. Perform a system check.

Evaporator Coil

WARNING

Disconnect main power source before beginning cleaning.

Physical shock may occur. Failure to comply may result in

serious injury to personnel.

CAUTION

Excessive pressure may damage fins. Do not use a pressure washer.

Failure to comply may result in damage to equipment.

Clean the evaporator coil during scheduled maintenance inspection. Inspect the coil and fins for damage

and repair if necessary.

For light dirt, use the following procedures:

1. Remove the evaporator grille.

2. Remove the two evaporator motors.

3. Blow out coil with compressed air in the direction opposite to normal air flow.

4. Replace both fan motors.

5. Reinstall the evaporator grille.

0031 00-7