For heavier dirt, use the following procedures:

TM 10-4110-262-13&P

0031 00

For heavier dirt, use the following procedures:

1. Remove the RU from the IC (see WP 0023 00).

2. Remove the evaporator grille.

3. Remove the drain pan (see WP 0044 00).

4. Remove the assembly fan.

5. Thoroughly wash with water (Do not use excessive pressure)

6. Reinstall fan assembly.

7. Reinstall drain pan (see WP 0044 00).

8. Reinstall the evaporator grille.

9. Reinstall the RU on the IC (see WP 0023 00).

Condenser Coil

Clean the condenser coil during scheduled maintenance inspections. Inspect the coil and fins for

damage and repair if necessary.

WARNING

Disconnect main power source before beginning cleaning.

Physical shock may occur. Failure to comply may result in

serious injury to personnel.

1. Remove the condenser grille.

2. Remove the front condenser cover.

3. Remove the fan motor from the fan assembly.

4. Blow out the coil with compressed air in the direction opposite to normal air flow.

5. Reinstall the fan motor.

6. Reinstall the front condenser grille.

7. Reinstall the condenser top grille.

END OF WORK PACKAGE

0031 00-8