 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-4110-262-13&P
0037 00
INSTALL
1. Place new lubricated o-rings in the fittings on the ends of the dehydrator.
2. Install the new dehydrator ensuring the proper direction of refrigerant flow.
3. Tighten the inlet nut. Hold the dehydrator with a back-up wrench on the hex behind the fitting.
4. Thread the outlet nut onto the outlet fitting and tighten.
5. Install the clamp around the dehydrator and mounting bracket.
6. Check for leaks, evacuate, and return to proper operation IAW WP 0031 00.
7. Replace the condenser section top grille. Connect the RU to an appropriate power supply and
operate the system while monitoring the refrigerant charge in the sight glass.
8. Adjust the refrigerant charge as necessary IAW WP 0031 00.
Dehydrator
ORS Nut
END OF WORK PACKAGE
0037 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals