|
| |
TM 10-4130-239-14
4-28.
GOVERNOR CONTROL (CONT)
3.
Hook governor spring in governor
lever (hook in second hole from
end of governor lever) .
4.
Hook other end of governor spring in notch of speed control.
5.
Mount speed control bracket on engine with three bolts.
6.
7.
8.
Install idle spring on speed control bracket.
Install control rod and control rod bracket assembly.
Follow instructions for the governor control adjustment
procedures.
Before starting or running engine, static
adjustment of the governor must be made.
Failure
to make static adjustments first could result in
engine overspeeding which may result in engine or
equipment damage causing personal injury.
NOTE
All linkage must be installed prior to making any
adjustments.
4-52
|
