|
| |
TM 10-4130-239-14
4-29.
STARTER PANEL ASSEMBLY REPLACEMENT (CONT)
3.
Place black lead on good ground (metal engine part).
Place red
lead on terminal (1) of starter button S7 leading to STARTER
connection assembly.
Note voltage.
If voltage not present,
replace cable.
4.
Place red lead on terminal (2) of starter button S7 leading to
starter.
5.
Press starter button S7 and note voltage.
6.
If voltage from second reading is the same as the first, switch
is good.
If voltage from second reading is less than first,
replace switch.
4-55
|
