|
| |
TM 10-4130-239-14
SECTION
I.
II.
III.
CHAPTER 5
DIRECT SUPPORT MAINTENANCE
INDEX
TITLE
TROUBLESHOOTING
GENERAL MAINTENANCE PROCEDURES
MAINTENANCE PROCEDURES
Section I.
TROUBLESHOOTING
PAGE
5-1
5-3
5-19
5-1. GENERAL.
Table 5-1, Troubleshooting, lists common malfunctions
which may be found during normal operation or during an inspection,
check procedure, or scheduled testing.
Perform the tests/inspections
and corrective actions in order listed.
This manual cannot list all
malfunctions that may occur or list all tests/inspections and
corrective actions.
If a malfunction occurs that is not listed or
covered in corrective action, notify your supervisor.
Table 5-1.
Troubleshooting
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
ENGINE STOPS SUDDENLY.
Step 1. Test high and low pressure switch assemblies for
continuity (para 4-35 and 4-36).
Replace switch (para 5-17 or 5-18).
Step 2. Test low temperature thermal switch for continuity
(para 4-40).
Replace switch (para 5-32).
2.
WATER LEAKS FROM FOAMED-IN SECTION OF SKID.
Step 1. Check for cracked evaporator.
Replace evaporator (para 5-27).
5-1
|
