|
| |
TM 10-4130-239-14
Table 5-1.
Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
3.
4.
5.
WATER LEAKS FROM FOAMED-IN SECTION OF SKID (cont)
Step 2. Check for leak at thermostatic valve.
Replace thermostatic valve (para 5-29).
Step 3. Check for leaking START RUN valve.
Replace START RUN valve (para 5-31).
ENGINE SMOKES EXCESSIVELY OR LEAKS OIL.
Step 1.
Step 2.
Step 3.
Test engine compression (para 4-25).
Replace cylinder block assembly (para 5-6).
Check cylinder block assembly for cracks.
Replace cylinder block assembly (para 5-6).
Check cylinder block for leaking seals and gaskets.
Replace cylinder block assembly (para 5-6).
PRODUCT WATER NOT COOL.
Step 1. Check refrigerant system pressure (para 5-14).
Recharge system (para 5-13).
Step 2. Check for refrigerant leaks (para 5-11).
Repair leaks (para 5-8).
REFRIGERATION SYSTEM CONTINUOUSLY LOSING REFRIGERANT.
Step 1. Check refrigerant tubing and components for leaks
(para 5-6).
Repair or replace as required.
Step 2. Check pressure relief valve (para 5-18).
Replace if defective (para 5-18).
5-2
|
