|
| |
TM 10-4130-239-14
5 - 2 8 .
START-RUN VALVE ASSEMBLY REPLACEMENT (CONT)
3.
Install START-RUN valve assembly in bottom of skid.
4.
5.
6.
7.
8.
9.
WARNING
Polyurethane foam is flammable.
Burning foam
causes toxic fumes.
When soldering, be very
careful not to ignite foam.
Braze three fittings to tubing (para 5-5).
Attach oil drain hose and tighten clamp.
Install thermostatic valve (para 5-26).
Perform water leak test (para 5-23).
Spray mold release in open area.
Fill in open area with polyurethane foam.
10. Install bottom plate with 16 bottom plate mounting screws using
sealing compound.
11. Set water chiller on skid base.
12. Install pin.
13. Install low temperature switch (para 4-29).
5-29.
LOW TEMPERATURE THERMAL SWITCH REPLACEMENT.
DESCRIPTION
This task covers:
Removal and Installation
Equipment
Condition
Para
2-8
4-15
Condition Description
Engine stopped.
Housing removed.
Engine removed.
Tools
Tool Kit, General
Mechanic’s, item 1,
Appendix B
Riveter, Blind, Hand
(5120-00-017-2849) ,
item 10, Appendix B
4-25
5-69
|
