|
| |
TM 10-4130-239-14
5-28.
START-RUN VALVE ASSEMBLY REPLACEMENT (CONT)
4.
Remove oil drain hose clamp.
Move oil drain hose out of way.
5.
Drive out handle pin.
WARNING
Polyurethane foam is flammable.
Burning foam
causes toxic fumes.
When soldering, be very
careful not to ignite foam.
NOTE
Desolder fittings as needed to remove from valve
assembly.
6.
Debraze START-RUN valve assembly (para 5-5).
7.
Remove spacer.
8.
Remove three fittings from valve assembly.
1.
Install three fittings in valve assembly.
2.
Install spacer.
5-68
|
