|
| |
TM 10-4130-239-14
4-21.
COMPRESSOR DRIVEBELT REPLACEMENT (CONT)
1.
Loosen two bracket mounting bolts.
2.
Lift compressor, sliding mounting bracket up.
3.
Remove drivebelt from compressor pulley and pulley drive.
Lift
belt over fan to remove.
Install drivebelt on pulley drive and compressor pulley.
1. Push down on compressor., sliding mounting bracket down.
2. Adjust drivebelt to proper tension, about 1/4-inch
(2/3-centimeter) deflection at center of belt.
3. Tighten two adjusting bolts.
4. Install water pump drivebelt (parag 4-20).
4-22.
FAN ASSEMBLY REPLACEMENT.
This task covers:
Removal and Installation
Equipment
Condition
Para
Condition Description
2-8
Engine stopped.
4-15
Housing removed.
4-25
Engine removed.
Tools
Tool Kit, General
Mechanic’s, item 1,
Appendix B
Materials/Parts:
Lockwasher MS35338-140
Lockout MS172238
4-31
|
