|
| |
TM 10-4130-239-14
4-22.
FAN ASSEMBLY REPLACEMENT (CONT)
1. Remove hexnut and lockwasher from studbolt.
2. Remove spanner nut from studbolt.
3. Loosen socket-head screw on back of fan hub.
4. Remove fan assembly.
1. Install fan assembly on fan adapter.
2. Install spanner nut on studbolt.
3. Align socket head screw over flat area on fan adapter.
4. Tighten socket-head screw on back of fan adapter.
5. Install lockwasher and hexnut on stud and bolt.
6. Install engine (para 4-25).
4-32
|
