|
| |
CHANGING THE FRONT PANELS
See Information in Installation Instructions.
TO SHUT DOWN THE ICE MAKER
1.
Turn ice maker to "OFF."
2.
Remove all ice from storage bin.
3.
Shut off the water supply.
4.
Remove front grille (Figure 2).
5.
Disconnect the inlet and outlet lines to water
valve. Allow these lines to drain and then reconnect to
the valve.
6.
Replace front grille and screws.
7.
Remove water from drain lines and drain water
pan if the unit will be subjected to freezing temperatures
during shut down.
8.
Before using again, clean and sanitize the ice
maker and storage bin.
Oiling:
All components of the ice maker are permanently
lubricated at the factory. They should not require any
additional oiling throughout the normal life of the
machine.
6
|
